If you’ve ever worked with high-density interconnect (HDI) PCBs, you know their small form factor and layered precision aren’t just impressive—they’re critical for modern devices like smartphones, wearables, and automotive sensors. As an HDI PCB supplier, I’ve seen firsthand how skipping a single required file can delay a project, lead to costly reworks, or even derail a launch. Over the 12 years I’ve been in this industry, I’ve guided hundreds of clients through the file preparation process, and the number one mistake I see is misunderstanding exactly what files fabricators need to turn a design into a functional, high-quality HDI board. Let’s break down every file you’ll need, why they matter, and how to prepare them correctly to keep your project on track. HDI PCBs

First, start with the core design files, and this is where most people go wrong: a generic Altium or Eagle project won’t cut it for HDI. Wait, let me clarify—“generic” is the issue here. HDI PCBs have unique requirements that standard PCB design tools often set on low-priority settings, so you need specific, exportable files that align with your fabricator’s capabilities. The first must-have is the Gerber X2 file set. Older Gerber formats (like Gerber RS-274X) are limited to layer data, but Gerber X2 adds critical metadata: copper thickness, solder mask specifications, component reference designators, and even net names. For HDI, this is non-negotiable because our manufacturing process relies on that metadata to place microvias, blind vias, and buried vias with micron-level precision. I once had a client send a standard Gerber file for a 6-layer HDI board with 0.1mm microvias—we caught the missing net data just before fabrication, but that delay cost them two days in a tight production window. To avoid that, always export Gerber X2 directly from your CAD tool, not as a PDF or screenshot.
Next, the Excellon drill file set. This isn’t just a list of hole sizes; HDI boards have multiple types of holes: through-hole vias, blind vias (connecting an outer layer to one inner layer), buried vias (connecting inner layers only), and microvias (tiny vias only on outer layers, usually 0.05mm to 0.1mm in diameter). The drill file needs to specify every single hole’s location, size, and type—blind vs. buried vs. through. A common mistake here is mixing up blind and buried via coordinates, which can lead to a drill hitting a component layer it shouldn’t, ruining the board. We recommend adding a “drill map” as part of this file set too—this is a visual overlay of all holes, making it easy for us to cross-check against your Gerber layers. For small microvias, we even use the drill map to confirm alignment with pad sizes, which is critical because a misaligned microvia can cause signal loss.
Then there’s the netlist file, also sometimes called a connectivity file. The netlist is like a map of all electrical connections on your board: which pads connect to which traces, which vias link to which layers, and how components are wired. For HDI, where signal integrity is often a challenge (due to high component density and high-frequency signals), the netlist ensures we don’t make a mistake in routing. For example, if you have a high-speed signal between a microcontroller and a Wi-Fi chip, the netlist tells us to keep that trace short and isolated, preventing interference. I’ve had clients skip the netlist in the past, and while we could usually work from the Gerber files, it added an extra 24 hours of engineering review time—time that could be spent on actual manufacturing. Always include a SPICE or EDIF netlist, and make sure it matches the Gerber X2 file; even a tiny discrepancy in a net name can lead to a non-functional board.
Now, the design rules document, which is where a lot of clients cut corners. This is a plain text or PDF file that lists all the critical manufacturing constraints for your HDI board: trace width and spacing, copper thickness, solder mask clearances, minimum microvia size, and impedance requirements. HDI boards have much tighter design rules than standard PCBs—for example, a standard PCB might have a 0.2mm trace width, but an HDI board could require 0.1mm or smaller. Your design rules document should also specify any special features: like any areas that need a no-solder mask finish (for SMT components), or any buried vias that should not be drilled through to the outer layers. I always tell clients to be as specific as possible here. Last year, a client listed a minimum trace spacing of 0.05mm, but in their Gerber files, we found a section with 0.04mm spacing—without the design rules document, we would have fabricated it to 0.05mm, which would have left their high-frequency signal traces too narrow, leading to failed performance tests.
Next, the assembly and component files, which are essential if you’re providing SMT components for your HDI board. Wait—even if we supply the components, we still need these files, right? Yes, because the pick-and-place machine needs exact coordinates for each part. The component placement file (also called a centroid file) lists the reference designator of each component, its X and Y position on the board, and its rotation. For HDI, components are often placed in very tight spots—like under the board’s outer layer or between microvias—so the centroid file must be accurate to within 0.01mm. We also need the bill of materials (BOM), which is a list of all components, including part numbers, quantities, values (for resistors, capacitors), and any special requirements (like automotive-grade parts). A mistake here—like listing a 0603 capacitor instead of a 0402, which is common in HDI—can mean the difference between a functional board and a board that doesn’t fit into your device. We recently had a client who listed the wrong part number in their BOM, and it took us three days to source a replacement, delaying their product launch. To avoid this, double-check your BOM against the component placement file.
Then there’s the stack-up file, which is unique to HDI PCBs. Unlike standard PCBs, which might have 2 or 4 layers, HDI boards can have 6, 8, or even more layers, with alternating core and prepreg materials. The stack-up file specifies the order of all layers: which layer is top copper, which is inner layer 1, which is bottom copper, what thickness each copper layer is, and what material is used between layers (FR-4, high-frequency material like Rogers, or thin prepreg for microvias). For example, if you’re building an automotive HDI board, you might need a stack-up with a thick core for mechanical stability and thin prepreg layers for high-density routing. The stack-up file also needs to include the location of blind and buried vias—some HDI designs use a “build-up” process where vias are added in layers, and the stack-up ensures we don’t drill through layers we’re not supposed to. I’ve worked with clients who forgot to include a stack-up file for a 10-layer HDI board, and our engineering team had to reverse-engineer it from the Gerber files, which led to a misaligned microvia layer that required rework.
Now, let’s talk about special HDI-specific files that you might not need for standard PCBs: microvia documentation. Microvias are the tiny vias that make HDI possible, and they have very specific rules: their minimum size, the maximum number of layers a microvia can connect (usually 2 or 3), and their pad size. Some clients forget to specify which vias are microvias vs. regular vias, and that can lead to us using a larger drill bit for a microvia, which ruins the board’s density. We also need your soldermask and silkscreen files, which are part of the Gerber set, but I’ll mention them here because they’re critical for assembly. The soldermask file defines where solder is applied, and the silkscreen file has component labels and board markers. For HDI, silkscreen has to be kept clear of component pads, so if your silkscreen file has text too close to a pad, it can cause soldering defects.
Wait, I should also mention a very common file that’s easy to overlook: the dimensional drawing. This is a 2D or 3D file that shows the exact size and shape of the HDI board, any cutouts, and any mounting holes. HDI boards are often custom-sized, so this file ensures we fabricate the board to your exact dimensions, not just what’s in the Gerber files. Last quarter, a client sent a Gerber file that made the board 5mm longer than their dimensional drawing—we caught it before fabrication, but that would have meant their device wouldn’t fit into the enclosure.
Now, let’s wrap this up with a few best practices from my 12 years as an HDI PCB supplier. First, always validate your files before sending them to us. Use a free online Gerber viewer to check that all layers are present, that net names match, and that holes align with drill coordinates. Second, if you’re using a CAD tool that requires specific exports (like Altium’s HDI design preset), use that—don’t export a standard project. Third, be transparent about your requirements: if you need a specific impedance for high-frequency signals, or if you have mechanical constraints (like the board must bend), tell us upfront. Finally, don’t wait until the last minute to prepare these files—HDI fabrication is more complex than standard PCB fabrication, and it often takes 2-3 weeks (or longer for complex designs) once files are approved.

If you’re working on an HDI project and aren’t sure which files you need, or if you’re worried about making a mistake in preparation, I’m here to help. As a supplier who’s specialized in HDI PCBs since 2011, I’ve helped dozens of clients streamline their file preparation process, avoiding delays and reworks. Whether you’re a startup building a new wearable, an automotive engineer designing a safety sensor, or a tech company launching a next-gen smartphone, we have the expertise to guide you through every step of the process. Contact our team to discuss your project, share your files, and get a detailed quote—we’ll work with you to ensure your HDI PCB fabrication goes smoothly.
Heavy Copper PCBs References
- IPC-2221: Generic Standard on Printed Board Design
- IPC-6012: Qualification and Performance Specification for Rigid Printed Boards
- Altium Designer HDI Design Guidelines, 2023
- Eagle PCB HDI Fabrication Requirements, Autodesk, 2022
Lucky Dragon Technology Shenzhen Co., Ltd.
With abundant experience, we are one of the most professional hdi pcbs manufacturers and suppliers in China. We warmly welcome you to buy bulk high quality hdi pcbs for sale here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Address: 5th Floor, Building 1, Jinshan Industrial Park, 375, Xixiang Section, Guangshen Road, Xixiang Street, Baoan District, Shenzhen City, Guangdong Province, China
E-mail: sales@Ldtac.com
WebSite: https://www.ldtac.com/