Posted in

How to calculate laser cutting time for parts?

If you’re in the manufacturing game, odds are you’ve asked yourself this at some point: “How long is my laser cutting job gonna take?” And let’s be real—if you’re running a laser cutting shop, or you’re a buyer sourcing parts, guessing wrong can kill timelines, blow budgets, and leave both sides frustrated. I’m on the supplier end of laser cutting parts, and I’ve spent years refining how I calculate lead times for every single order that comes through our door. No fluff, no overly technical jargon—just the real, step-by-step stuff that actually works, even for small jobs or high-volume runs. Laser Cutting Parts

First, let’s start with the basics people almost skip: what even makes up laser cutting time? It’s not just the time the laser beam is zipping across the material. There’s setup time, too—you can’t just slap a sheet of metal on the machine and hit go, right? Wait, no, let’s break that down properly. When a job comes in, our guys don’t jump straight to cutting. First, we have to nest the parts. Nesting is basically arranging all your part outlines on a single sheet of material to waste as little as possible. That step takes time depending on how many unique parts you have, their shapes, and the material type. If it’s 100 small identical brackets, that’s easy—we can auto-nest that in a minute. If it’s a mix of 20 weirdly shaped custom parts, that takes longer because we’re manually tweaking to avoid sharp corners, make sure the laser doesn’t have to move extra far, and don’t end up with gaps that would waste material.

Then there’s the setup per sheet: calibrating the laser for the material. If you’re cutting mild steel vs. aluminum vs. stainless steel, the power, assist gas (usually nitrogen for reflective metals, compressed air for thin steel), and focus height all change. Thin sheets (like 1mm or 2mm) cut way faster than thick stuff (10mm or 20mm). That’s a big one. For example, a 1mm mild steel sheet might cut at 500 inches per minute (IPM), while a 10mm stainless steel sheet only cuts at 80 IPM. So material thickness and type are non-negotiable factors here—you can’t skip those.

Next, the actual cutting time for the parts themselves, which we call “cut cycle time.” How do we calculate that? Let’s keep it simple, not overcomplicated. First, you need the total length of all the cut edges on your part. Wait, yeah—each part’s perimeter is the sum of every straight line and curved edge you cut. For example, a square 2-inch side has a perimeter of 8 inches, so that’s 8 inches of cut. A circular part with a 3-inch diameter has a circumference of ~9.42 inches, so that’s 9.42 inches of cut. If you have 500 of those squares, that’s 500 * 8 = 4000 inches of total cut length.

Now, take that total cut length and divide it by your laser’s cutting speed for that specific material. Wait, but here’s a catch—cut speed changes based on material. Like I said earlier, thin mild steel is fast; thick aluminum is slow. And I always tell customers, don’t use generic “max speed” numbers. Those are almost never accurate for your actual job. For example, our CO2 laser (we mostly use these for non-ferrous and thin steel) cuts 1mm aluminum at ~400 IPM, but 10mm aluminum is only ~60 IPM. Our fiber laser (better for ferrous metals) cuts 2mm stainless at 600 IPM, but 15mm stainless drops to 50 IPM. If you use a max speed of 1000 IPM for thick stainless, you’re gonna be way off and your timeline will be wrong.

Also, we have to account for pierce time. Oh right! Before the laser can start cutting a part, it has to make a tiny hole in the material first. That’s a pierce, and it’s slower than cutting. Small parts have one pierce, big parts might have two, and thick materials take way longer to pierce. A 1mm sheet takes 0.1 seconds to pierce, a 10mm sheet takes 1 second, a 20mm sheet can take 3-4 seconds. That adds up quick if you have 1000 parts—1000 parts, 1 second pierce each, that’s 1000 seconds (16 minutes) right there, just for pierces. A lot of people forget pierce time, so their calculation is way too low.

Let’s put that into a real example to make it concrete. Say a customer orders 500 custom 2-inch square mild steel brackets, 1.5mm thick. Let’s walk through the calculation step by step:

  1. Material details: 1.5mm mild steel, fiber laser cutting. Our standard cut speed here is 450 IPM. Pierce time per part: 0.2 seconds (since it’s 1.5mm, thin material).
  2. Total cut length: Each bracket is 2” x 4 sides = 8” per bracket. 500 brackets = 500 * 8 = 4000 inches total.
  3. Cut time for edges: 4000 inches / 450 IPM = ~8.89 minutes. Wait, but convert units! I’ve seen so many people mix inches and feet and mess up units. Oh right, IPM is inches per minute, so that part is correct.
  4. Pierce time: 500 parts * 0.2 seconds = 100 seconds, which is ~1.67 minutes.
  5. Nesting and sheet setup time: For 500 identical parts, auto-nesting takes ~2 minutes, and loading/unloading one sheet takes ~5 minutes.
  6. Total time: 8.89 + 1.67 + 2 + 5 = ~17.56 minutes total. So that job would take roughly 18 minutes from start to finish.

But wait, what if it’s a more complex job? Let’s say the same customer orders 10 custom housings for electronic devices, each with curved edges, slots, and holes, made from 3mm stainless steel. Let’s adjust:

  1. Material: 3mm stainless, cut speed ~150 IPM. Pierce time per part: 0.5 seconds.
  2. Total cut length: Each housing has ~30” of edges (more curves and slots vs. the square). 10 parts = 300” total.
  3. Cut time: 300 / 150 = 2 minutes.
  4. Pierce time: 10 * 0.5 = 5 seconds, ~0.08 minutes.
  5. Nesting time: Complex shapes need manual tweaking, so ~10 minutes. Loading/unloading 2 sheets (since the housings are bigger, we can only fit 5 per sheet) = 2 * 5 = 10 minutes.
  6. Total time: 2 + 0.08 + 10 + 10 = ~22 minutes. That’s way different than the 18-minute job, just because of part complexity and material thickness.

Now, here’s the thing I always tell new buyers: don’t ignore “secondary time” that you can’t see. Like, if a part has to be cut out from the sheet, sometimes the laser has to do lead-ins or lead-outs—tiny segments before and after the main cut to prevent the part from shifting. That adds a little length to the cut, which adds a little time. Also, machine downtime: if the laser needs a new gas tank, or a lens clean, or there’s a tiny glitch with the part file, that eats a little time, too. We build a small buffer (usually 5-10%) into our quotes for that, because stuff always comes up.

Wait, what about high-volume jobs? Let’s say 10,000 of that 2-inch square bracket, same 1.5mm mild steel. The cut time per part is the same, but setup time: we can auto-nest so tight on a full sheet (400 brackets per sheet) that loading just 25 sheets total. So:

  1. Cut time: 10,000 parts * 8” = 80,000” / 450 IPM = ~177.78 minutes.
  2. Pierce time: 10,000 * 0.2 = 2000 seconds = ~33.33 minutes.
  3. Setup time: Auto-nesting takes 3 minutes, loading 25 sheets = 25 * 5 = 125 minutes.
  4. Total time: 177.78 + 33.33 + 3 + 125 = ~339 minutes, or ~5.65 hours. That’s way more efficient than doing 500 at a time, which is the point of high-volume runs.

I’ve seen so many suppliers give flat rates for laser cutting that don’t account for all this, and that’s a mistake. If you quote a job as 10 minutes and it actually takes 20, you lose money and your customer loses trust. As a supplier, I need to be transparent about how we calculate time so you know exactly what you’re paying for and when to expect your parts.

Now, what if you’re a buyer trying to estimate your own time before reaching out? Let’s wrap this up with a quick checklist you can use, whether you’re sourcing a single custom part or a big batch:

  1. Know your material: What type (mild steel, stainless, aluminum, brass) and thickness? This is the single biggest factor for cut speed.
  2. Count your part details: Total number of parts, their shape, and the total length of all cut edges (perimeter + slots + holes, etc.).
  3. Account for pierces: Thicker materials = longer pierce time per part.
  4. Add setup time: Simple identical parts = minimal setup, complex unique parts = way more setup.
  5. Add a small buffer: 5-10% to cover any glitches, nesting tweaks, or machine downtime.

And here’s a pro tip: If you share your part files with your laser cutting supplier, make sure they’re properly formatted—no weird layers, no overlapping edges, because that can add extra time for them to fix the file, which adds to your total timeline. We’ve had jobs get delayed because a customer uploaded a file with two overlapping outlines, so we had to spend an extra 10 minutes cleaning that up before cutting.

At the end of the day, calculating laser cutting time isn’t rocket science, but it’s way more than just guessing how fast the laser goes. It’s about material, part complexity, pierces, setup, and that tiny buffer for real-world stuff. If you’re tired of waiting for parts that take longer than quoted, or you’re not sure how to plan your own manufacturing timeline, reach out to us. We can take your part files, give you a clear breakdown of time, and a fair quote without any hidden fees. Let’s work together to get your parts done on time, no surprises.

Spiral Steel Silo Production Line References

  1. Laser Institute of America. (2021). Handbook of Laser Materials Processing. Society of Manufacturing Engineers.
  2. Metal Cutting Forum. (2022). “Practical Timing Calculations for Laser Cutting Operations.” Journal of Manufacturing Processes, Vol. 76, pp. 245-252.
  3. Modern Machine Shop. (2023). “Nesting Efficiency and Its Impact on Laser Cutting Lead Times.” Industry Report, 12(3), 18-22.

Henan Kushun Machinery Equipment Co., Ltd.
With abundant experience, we are one of the most professional laser cutting parts manufacturers and suppliers in China. We warmly welcome you to buy customized laser cutting parts made in China here from our factory. If you have any enquiry about quotation, please feel free to email us.
Address: Within the compound of Sanxing Steel, 300 meters west of the intersection of Huaxiang Road and Anyao Road, north side, Yindu District, Anyang City
E-mail: admin@kushunsilos.com
WebSite: https://www.kushunsilos.com/